Nissan Skyline R32 door assembly removal and installation
 
Nissan Skyline GT-R32 Door assembly removal and installation
 
(1) Removal, installation and inspection
 
• To remove and install, remove check link pin and then remove door side hinge bolts (two each, upper and lower).
• When removing, pay attention not to damage coated surface.
NOTES:
(1) When removing and installing, support door assembly using jack, cushioned with waste cloth to prevent damage to door.
 
Nissan Skyline GT-R32 Door assembly removal and installation
 
(2) Check door hinge for the following points: 
Abnormality or large resistance during opening or closing ... Apply grease
Damage or wear on components ... Replace
(3) Replace check link if damaged or worn abnormally.
(4) Install check link with RH or LH identification mark facing up.
(5) Apply "Nissan body grease" to rotating part of hinge and to check link pin.